6.2 C
New York
Thursday, January 20, 2022
Router FenceMake It - Adjustable Router Fence

Make It – Adjustable Router Fence

Must read

▼▼ Plans Available ▼▼

– Instagram – http://instagram.com/dpmakestuff
– Patreon – https://www.patreon.com/dpmakestuff
– Website – http://www.dpmakestuff.com

I made a quick router fence a few years ago and since that day, building a better one was on my to-do list.

This one is made from Baltic Birch plywood and features adjustable front plates, dust collection and a T-Track so I can use the sliding flip stop from my table saw fence for repeatable cuts. The whole thing is made to be very lightweight with a small footprint for easy storage. It gets clamped to my table saw fence since my router table is built into my saw, but it is versatile enough to work on any fence or be modified for other applications (t-track tables etc.)

Plans are available on my website!

—Threaded Inserts – http://amzn.to/2mpNnzg
—Thumb Screws – http://amzn.to/2mHkv7L
—T-Track – http://amzn.to/2nkVdJA
—Sliding Flip Stop – http://amzn.to/2nl8zFL
—Titebond Glue – http://amzn.to/1TmiBAs
—Glue Bottle – http://amzn.to/1SirgW7
—Ruler – http://amzn.to/2bOARY4
—Sharpies – http://amzn.to/2aekAWZ
—Masking Tape – http://amzn.to/2anrVD7
—Marking Gauge – http://amzn.to/1Sir894
—Chisels – http://amzn.to/2ci2RRz
—Forstner Drill Bits – http://amzn.to/2bRDTMk

Shop Equipment
—Saw Stop – http://amzn.to/2ctLWdP
—Band Saw – http://amzn.to/2c72OZN
—Rockler Stuff – http://amzn.to/2bYUGJf
—Lathe – http://amzn.to/2e9IjMN
—X Carve CNC – https://www.inventables.com/technologies/x-carve

Audio Video Things & Stuff
—Camera – http://amzn.to/2fHAUH8
—Tripod – http://amzn.to/2fq28AW
—Lights – http://amzn.to/2fPTM6b
—Microphone – http://amzn.to/2fq7s7j
—Tripod – http://amzn.to/2fHCrgr
—Adapter – http://amzn.to/2fHu6JK
—Pop Shield – http://amzn.to/2eqYGS3
—Computer – http://amzn.to/2fHA25n

PO BOX 3112
Beaumont, Alberta
T4X 1K9

#imustcreate #imake #dpmakestuff
Video Rating: / 5

In this video i show you my router table fence build. Simple diy router fence with dust port. Traditionally some parts i made with laminate.

Other free plans woodworking videos here:

Support GRINwood:

GRINwood shop:

Follow GRINwood:


Clover 3 – Vibe Mountain
Simple Step – Slenderbeats
Video Rating: / 5

- Advertisement -spot_img

More articles


  1. Enjoy this video? Fantastic! Do me a favour and follow me on Instagram – @dpmakestuff. I do giveaways and you get to see what I'm working on every day. Thank you!

  2. Perfect! I ordered too much t track for my custom table saw and router rolling table build and was looking for a way to use it as a router fence! Thanks dude.

  3. Dustin just watched your adjustable router fence video………..ive got to say its exactly what ive been looking for, great workmanship and attitude to boot! thx !

  4. That's a bargain for those plans, going to get on here in the morning and buy it. Thanks. I just wish I could now get that into sketchup…tech challenged here.

  5. Your and inspirational "badass". Excellent video and process. I will download your plans. Thank you for sharing.

  6. I made one similar myself (but without the adjustable sides, I just used the same width as the hole in the insert).
    I put a lid on the entire width and drilled a couple of holes in the rear plate that sits against the saw's fence for some Bessey TK6 clamps. On the other side of the fence, I put a load spreading board with countersunk holes for the clamps and secured them with a couple of wide slotted washers. That way the entire "contraption" comes off as one complete piece with no need for loose clamps, and no risk of warping the relatively thin aluminium fence.

  7. Ok late to the party but loved the vid

    I have a similar set up with a router lift as part of my table saw.

    What is that song at the end?

  8. Why are you climb cutting the slots in the front starting at 2:58 Bought your plans, very nice. I plan to put a t-track on the front as well.

  9. I also hate MDF, but I also dislike Canadians but in this case the enemy of my enemy is my friend! Nice fence, I'll subscribe…

  10. Parabéns…., eu estava precisando de algumas ideias para fazer a minha para a tupia, caiu do céu seu vídeo, vou utilizar alguma das suas ideias!
    Abraço e muito obrigado por compartilhar comigo seus conhecimentos.
    Abraço aqui do Brasil 🇧🇷

  11. Gracias por enseñarnos a aprender y regalarnos de su valioso tiempo maestro de Aguascalientes México Francisco gamez 👍👍👍👍👍👍👍👍👍👍👍😀 bendiciones para usted y toda su familia es usted genial felicidades nuevamente muchísimo éxito

  12. Super excellent work of piece. Keep up the good work. I would like to try it… but is there any free plans for this project?

  13. Hello, May I know where you bought the gray 40 hose clamp. Thanks George
    Buongiorno, potrei sapere perfavore dove hai acquistato il collare ferma tubo del 40 grigio. Grazie Giorgio

  14. Super job well done, and at least someone who takes advantage of these achievements for those who are interested, again well done and a big thank you

  15. Excellent. Great tip on drill extra hole using the hole saw to prevent dust and burning. Thank you for sharing.

  16. Молодчина! Сплошной креатив! Классная работа!)))


Please enter your comment!
Please enter your name here

- Advertisement -spot_img

Latest articles