1.9 C
New York
Thursday, December 9, 2021
Hand Held RouterFerrex Palm Router 2020 Bush guide and Templates

Ferrex Palm Router 2020 Bush guide and Templates

Must read

Get The 440 page "Art of Woodworking" Guide + Plans for FREE

We respect your email privacy

Aldi have got their 3rd release of the Ferrex palm trim router currently for sale. A great tool and this is the 3rd one Ive purschased, the 1st is still going strong and these are formidable little machines are capable of good work and a useful often used addition to the workshop.

There is very little difference in this router from the previous model, power and wattage remains the same, lead length is the same, accessories are the same and the only real difference is a colour change in the body and the switch. Price seems to have gone up to £34.95 which isnt too expensive for what it is and the use you ll get out of it. Keep your eyes out for them getting reduced if theres stock left at your nearest store.

Included in the accesories is the bush guide and by removing the 4 screws in the base it slots in simply and securely. Using the bush guide with a pattern or template or even clamped edges we can do repeated accurate cuts time and time again and even make slotted cuts and sections in trays, mobile phone holders, bath boards etc.

There are many ways to make a template, from jigsaws, scroll saws, laser cutters. Doing it with none of that though you can use clamps and bits of wood for flats/straights/ Curves a bit more tricky, lids I use, jam jar lids, plates, pre existing curves. You can move it all around and create a template. Once youve got yourself a template its then quite easy to move and slide that about to make more templates.
Drop me a comment if youd like to see a video covering making some templates.
Thanks for watching, Bongo.
Video Rating: / 5

Click here to get Teds 16,000 Woodworking Projects

3000W electric handheld trimmer woodworking palm router laminate trimmer tool

FEATURES

Transparent cover to control the flying sawdust.
– Can clearly observe the processing conditions.
– Trimmer applicable under normal ambient conditions, equipped with the right rotary.
– Widely used in wood processing, furniture manufacturing and other industries.
– Apply to wood, plastic sheeting, wood veneer and other similar materials chamfering, grooving, surface finishing, curve cutting, planing wood edge, pattern processing operations activities.

Specifications:

Voltage: 220V
Frequency: 50/60Hz
Color: Green
Material: Aluminum alloy
Max. Power: 3000W
Rated Power: 1100W
Frequency: 50/ 60HZ
Size: Approx. 8.0*3.5in
Collet Diameter: Approx. 0.06″
Cable Length: Approx. 180cm/

:
Drillpro 15pcs 1/4 Inch Shank Router Bits Set Carbide Woodworking Tools for Home Improvement and DIY

Features:
●Durable Steel Body: YG8 Carbide Blade and balanced craftsmanship.
●Use of Safe: Greater stability and less vibration during use, anti kickback design for safe installation.
●Widely Applications: Suitable for Solid Wood, density board, MDF, shaving board.
●Easy to Store and Carry: A sturdy case for easy storage and organization.

Specification:
Brand Drillpro
Product Name 15pcs 1/4 Inch Shank Router Bits Set
Blade Material YG8 Carbide(HRA: 89)
Shank 1/4 Inch(6.35mm)
Color Green
Box Size 185mm×160mm×50mm
Package Weight 0.5kg

Instruction:
Diameter(mm) Maximum Spinning Speed(r/min)
Maximum Feeding Speed(mm/min)
Below 25 24000 5000
25.1—35 18000 4000

Package Included:
15×
1x 3mm(1/9″) Straight Bit
1x 6mm (1/4″) Straight Bit
1x 12mm (1/2″) Straight Bit
1x 16mm (5/8″) Straight Bit
1x 6.35mm (1/4″) Panel Pilot Bit
1x 6.35mm (1/4″) “V”Type Slotting Cutter
1x 12.7mm (1/2”) “V”Type Slotting Cutter
1x 12.7mm (1/2″) Flush Trim Bit
1x 12.7mm (1/2″) Mortising Bit
1x 12.7mm (1/2″) Dovetail Bit
1x 32mm (1-1/4″) 45° Chamfer
1x R4mm (5/32″) Roman Ogee Bit
1x R6.35mm (1/4″) Cove Box Bit
1x R6.35mm (1/4″) Cove Bit
1x R9.5mm (3/8”) Corner Round Bit
1× Wrench
1× Storage Box

Label Correction:
6.35mm Traight Bit→ 6.35mm Straight Bit
12.7mm Traight Bit→ 12.7mm Straight Bit
16mm Traight Bit→ 16mm Straight Bit
12.7mm Straight Bit→ 12.7mm Flush Trim Bit

Please subscribe to be updated to my other new videos
Video Rating: / 5

Click here to get Teds 16,000 Woodworking Projects

- Advertisement -spot_img

More articles

22 COMMENTS

  1. We have Spitfires (normally two) flying over our house every weekend in summer. You can buy a ride in one. Everyone stops and looks up, wonderful sight.

  2. Bongo I hope your well me old China
    You've been quite lately, as you used to put a video on nearly every week back in the day

  3. With them templates, i would have taken the excess off with a jigsaw, and just leave about a quarter inch to trim off. When you are asking your palm router to cut through 12mm? Ply, you are working the machine too hard. Remember it's not Elu, Makita, Dewalt, Milwaukee. It's Aldi.
    Not a criticism btw, just something to give your palm router a longer life.

  4. If you're worried about the guide bush wearing the pattern, dump the bush and use a pattern bit with the bearing at the top (or bottom depending which one you get). They run loads smoother because of the bearings. Also rough cut your material with a jigsaw first and then use your pattern to create the finished item. Easier to trim a piece than have to rout a cutter fullwidth groove around your template.

  5. Thanks Bongo, glad to see you at it. I've been making things and it's all your fault. Well, mostly. Peace and Love from PA, USA.

  6. I've just bought one of those palm routers, didn't have a clue how to use that black metal disk.
    PS That Spitfire flew over my house earlier this week!

  7. Hello my friend.

    When I saw that the noise in the beginning of the video was an airplane, I said oh :-). I thought it was an accident.

    These routers are like replica of the makita brand. because the appearance and design are very similar. I have been using the same for about 3 months. (makita 3709) I did not know what that black metal stamp is for 🙂 Now I found out thanks to you. thank you. It's great to use this in cuts using stencil. I have this video on my playlist. I should definitely try this out. Congratulations. Thank you for sharing. See you. stay healthy and happy. Big greetings. Yours truly.

LEAVE A REPLY

Please enter your comment!
Please enter your name here


- Advertisement -spot_img

Latest articles